本文へスキップ

POWERS motorcycle is over 30 years in Yokohama.
Please contact us for anything about motorcycle.


ETC on-board device for motorcycles






















ETC devices prices


　Powers is a two wheel ETC 2.0 setup shop!

　　ETC setup fee discount campaign in progress!
ETC2.0/1.0　￥3,300　→　￥2,750





(All Prices are included tax JPY)

ETC 2.0 GPS built-in


Body and indicator are separated type.
ETC2.0　MSC-BE700S Cruiser
Naked		 Scooter
type		 Full cowl
type


Click here for details the manufacture site, only Japanese.		 Total 38,500 44,000 40,700
Device 26,950
Wage 8,800 14,300 11,000
Setup 2,750



ETC2.0　JRM-21 Cruiser
Naked		 Scooter
type		 Full cowl
type


Click here for details the manufacture site, only Japanese.		 Total 39,050 44,550 41,250
Device 27,500
Wage 8,800 14,300 11,000
Setup 2,750





ETC 1.0 has not GPS


Body and indicator are separated type.
MSC-BE61 Cruiser
Naked		 Scooter
type		 Full cowl
type


Click here for details the manufacture site, only Japanese.		 Total 32,450 37,950 34,650
Device 20,900
Wage 8,800 14,300 11,000
Setup
 2,750













Installation of ETC for motorcycles


Please prepare following document, according the engine displacement.
Over 251cc：Vehicle inspection certificate (車検証)
Within 250cc：Light vehicle registration certificate (軽自動車届出済証)


Please select ETC on-board unit at shop front.
Depending on the model or space the type of ETC may be restricted. Please consult with the mechanic about the installation place. We will devise to install ETC as match as you want.


Please fill in the application form.
The application form requires signature of the person yourself. If a substitute person visits us, a proxy will be required. There is the proxy form on POWERS, please take it in advance.


It takes about 1~2 hours to complete installation and setup.
We present Mos Burger 's coffee ticket next door. Please use it while waiting.


Installation complete!
You can through pass a tallgate without stop. You also receive ETC discount without having to struggle to remove gloves and prepare coins, it is easy and comfortable!


＜NOTE＞
● Even with naked or off-road models, the installation wage may increase if the exterior is attached or removed for ETC installation. Thank you for your understanding.

● The time required from installation to setup is usually 1～2 hours, but you may get extra time on busy season. Also, depending on the state of the vehicle such as a custom motorcycle installation time may change.

● In the case of there is no stock your selected ETC in the shop front, it will be ordered and may take several days to arrive.

● From the viewpoint of safety it is not possible to sell ETC units only. Please be sure to install it at a shop, please understand kindly because it is a measure to prevent accidents such as not opening the gate.

● An application for the ETC card is required in advance. Generaly adding ETC card on a credit cards already you have, but there is also a deposit type ETC card. For details, please inquire the ETC card issuer. It seems to take about 10 days to issue, so we recommend that you make an early arrangement before installing ETC.
ETC re-setup


Please re-setup your ETC when the owners or the motorcycle's information is changed. For example, you bought a used bike which has attached ETC unit already, or reattaching your ETC unit from a previous bike to a new bike, the license plate has changed, and so on.

Please prepare following document, according the engine displacement.
Over 251cc：Vehicle inspection certificate (車検証)
Within 250cc：Light vehicle registration certificate (軽自動車届出済証)


Please fill in the application form at our store.
Please fill in the application form at our store. The application form must be signed by the person himself / herself. If a substitute person visits us, a letter of attorney will be required. Please prepare it in advance and bring this.
A letter of attorney writing sample is here.

Re-setup can complete about 20 minutes.
2.0 / 1.0 Re-setup fee：￥2,750（Tax included）



＜NOTE＞
● Please come on by a motorcycle equipped with ETC. The ETC device needs already be installed on your bike and working. Even if you bring only ETC device, we cannot re-set it up. Also, the ETC sensor must be securely attached to the bike to safely pass through the gate. Please note that we may refuse to re-setup if it is in a state where it can be easily attached and detached.

● ETC unit number is necessary for re-setup. It is usually described on the ETC body. However, according to the situation of installing, there are cases where it can not be confirmed. If desorption is necessary, a wage may be charged.

● The setup information includes the license plate number. If there is a possibility that the license plate will be changed due to the name change accompanying the assignment, we recommend that you re-setup after registering the Land Transport Bureau.

● We are a dedicated motorcycle ETC set-up store and can set up ETC devices specifically for motorcycles. If your motorcycle is equipped with ETC for 4-wheeled vehicles, it cannot be set up due to the system.


* From the viewpoint of safety, please installation of ETC device by an official motorcycle ETC dealer. In addition, please note in advance that we will not be responsible for any except re-setup work when re-setup your ETC device already installed on your motorcycle. Thank you for your understanding and cooperation in order to use motorcycle ETC safely.